+605-318 9163 / +6019-5899163  |   77, Medan Soon Choon, Taman Song Choon, 31350 Perak.

TITAN CARGO MC SAE 10W-40 (5L)

Previous 1 / 4 Next

TITAN CARGO MC SAE 10W-40 (5L) Engine Oils for Commercial Vehicles Engine Oils


TITAN CARGO MC 10W-40

MC-synthesis, high-performance, fuel-economy oil for a variety of commercial vehicle diesel engines. Specially developed for extended service intervals. Good cold starting and lower oil consumption.

Description

TITAN CARGO MC is a super long-life, fuel-economy, semi-synthetic engine oil for all diesel engines with and without turbocharger in trucks, buses and industrial machinery. The SAE Class 10W-40 ensures reliable all-season use. Suitable for the longest oil change intervals.

Application

TITAN CARGO MC has a higher performance capacity than the usual high-performance engine oils. Internationally, this type of oil is designated as UHPD (UHPD = Ultra High Performance Diesel Oil). Regardless of the current service life, even older diesel engines can be changed over to TITAN CARGO MC without flushing. Protects against corrosion even when high sulfur-content diesel fuels are used. The performance of TITAN CARGO MC makes extremely long oil change intervals possible based on the truck manufacturer’s recommendations. According to the new Mercedes Benz fluids specifications MB APPROVAL 228.5, an extended oil change interval is guaranteed for trucks in long distance and local use for the 900 and 500 engine series. Used TITAN CARGO MC is classified as “Waste Oil Category 1”. Please dispose of it accordingly.

Advantages/Benefits

  • Reduced fuel consumption due to fuel-economy characteristics.
  • High wear protection even under continuous stress at full engine load.
  • Protects against mirror surface formation on cylinder races.
  • Fastest possible oil circulation after start; this reduces cold-start and warm-up wear.
  • Reduces exhaust gas particulates.
  • Reliable protection against deposits, sludge and adhesion during extremely high thermal stress and stop-and-start driving.
  • Optimum compatibility with seal materials.
  • Environmentally friendly due to the longest oil change intervals and low evaporation losses.

CHARACTERISTICS

Density at 15 °C g/ml 0,867 DIN 51757
Flash Point, COC °C 220 DIN ISO 2592
Pour Point °C - 42 DIN ISO 3016
Kinematic Viscosity at 40°C mm²/s 100,00 DIN 51562-1
Kinematic Viscosity at 100°C mm²/s 14,55 DIN 51562-1
Viscosity index - 146 DIN ISO 2909
Product code   PT27  

Specifications/Approvals

  • ACEA E7/E5/E4
  • API CI-4
  • CAT ECF-1-a
  • CUMMINS CES 20076/7
  • DEUTZ DQC III-05
  • MACK EO-M PLUS
  • MAN M 3277
  • MAN M 3277CRT
  • MB-APPROVAL 228.5
  • MTU DDC Typ-3 / Type-3
  • RENAULT RXD
  • VOLVO VDS-2

FUCHS Recommendations

  • CUMMINS CES 20078
  • DAF
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Messages*  
   

Switch to Mobile Version
Subscribe Newsletter